Questo sito utilizza cookie, anche di terze parti, per migliorare la tua esperienza e offrire servizi in linea con le tue preferenze. Chiudendo questo banner, scorrendo questa pagina o cliccando qualunque suo elemento acconsenti all’uso dei cookie. Se vuoi saperne di più o negare il consenso a tutti o ad alcuni cookie

Cookie Policy

SINGLE BEAM OVERHEAD
TECHNICAL CHARACTERISTICS

Structures
Designed and constructed depending to the crane service and use.

Broad
Flanged beams for low capacities and for the others use box beams in welded steel plate material are considered.

Travelling movement
On double rim steels wheels rotating on roller bearings with driving wheels controlled by self-breaking geared motors, progressive starting and breaking type.

Lifting movement
With electric rope hoist for capacities up to 8.000 kg and crab for bigger capacities. Heavy duty for power greater than 25 HP foreseen a slip ring motor with INOX step resistances. Creep speed or auxiliary hoist upon request.

Electric Equipment
Placed in a water tight metallic cabinet with high quality components , choosen accordingly. Reversal of travelling movement creep speed operation are controlled by a timer , in order to safeguard stress in movements parts.

Painting
With one coat antirust primer and two finishing enamelled coats. Sandblasting on steel works is available on request.

Fittings
For all the working necessities.

Upon request:
• Pincers and clamps, buckets and vacuum suction cups on the lifting apparatus.
• Travelling movements controlled by inverter.
• Remote control.

SINGLE BEAM OVERHEAD
TYPE Capacity
[Kg]		 S
[m]		 H
[m]		 Vs
[m/min.]		 Vc
[m/min.]		 Vt
[m/min.]
PM 2 2.000 Da 10 a 25 Da 5 a 12 4/1 18/6 o 20/5 32/8 o 40/10
PM 3,2 3.200 Da 10 a 25 Da 5 a 12 4/1 18/6 o 20/5 32/8 o 40/10
PM 5 5.000 Da 10 a 25 Da 5 a 12 4/1 18/6 o 20/5 32/8 o 40/10
PM 6,3 6.300 Da 10 a 25 Da 5 a 12 4/1 18/6 o 20/5 32/8 o 40/10
PM 8 8.000 Da 10 a 25 Da 5 a 12 4/1 18/6 o 20/5 32/8 o 40/10
PM 10 10.000 Da 10 a 25 Da 5 a 12 4/1 18/6 o 20/5 32/8 o 40/10
 

 

 <<< Back

 

DOUBLE BEAM OVERHEAD CRANE WITH ROPE HOIST
TECHNICAL CHARACTERISTICS

Structures
Designed and constructed depending to the crane service and use.

Broad
Flanged beams for low capacities and for the others use box beams in welded steel plate material are considered.

Travelling movement
On double rim steels wheels rotating on roller bearings with driving wheels controlled by self-breaking geared motors, progressive starting and breaking type.

Lifting movement
With electric rope hoist for capacities up to 8.000 kg and crab for bigger capacities. Heavy duty for power greater than 25 HP foreseen a slip ring motor with INOX step resistances. Creep speed or auxiliary hoist upon request.

Electric Equipment
Placed in a water tight metallic cabinet with high quality components , choosen accordingly. Reversal of travelling movement creep speed operation are controlled by a timer , in order to safeguard stress in movements parts.

Painting
With one coat antirust primer and two finishing enamelled coats. Sandblasting on steel works is available on request.

Fittings
For all the working necessities.

Upon request:
• Pincers and clamps, buckets and vacuum suction cups on the lifting apparatus.
• Travelling movements controlled by inverter.
• Remote control.

DOUBLE BEAM OVERHEAD CRANE WITH ROPE HOIST
TYPE Capacity
[Kg]		 S
[m]		 H
[m]		 Vs
[m/min.]		 Vc
[m/min.]		 Vt
[m/min.]
PB 3,2 3.200 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PB 5 5.000 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PB 6,3 6.300 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PB 8 8.000 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PB 10 10.000 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PB 12,5 12.500 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PBA 16 16.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 20 20.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 25 25.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 30 30.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 40 40.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 50 50.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 60 60.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10

 

 <<< Back

 

  

SINGLE BEAM GANTRY CRANE
TECHNICAL CHARACTERISTICS

Structures
The master girders, legs, and connections, are welded structural steel plate material, reinforced by diaphragms and cross bracings. A gangway can be provided, on request, along one of the master girders.

Longitudinal travel
Properly dimensioned steel wheels running on roller bearings. Movement for high lifting capacities and large size cranes is achieved by means of double wheel articulated carriages.
Only highest quality casehardened and temperated oilbath gearboxes are used.
On request an inverter is available in order to have soft start, tht prevents dangerous load swingings.
It is installed on any crane gearmotors directly coupled on the wheel (very low maintenance).

Lifting and trolley
For single girder cranes a high quality hoist-trolley runs along the girder lower flanges, while double girder cranes are supplied whit a structural box crab, produced by ourself, which runs on four steel wheels rotating on roller bearings. Lifting winding drum directly splined on its gearbox. Electro-hydraulic shoes brake on the lifting movement.
Motor and gearbox fixing bases are manufactured by numerical control machine in order to assure the perfect ranging among the components.

Electric equipment
• Placed in a water tight metallic cabinet with high quality components.
• Double safety limit switch is mounted on the crab lifting movement.

Control
Usually controlled by means of low-tension pendant push-button panel. Remote control also available on request.

Painting
Steel structures are mechanically brushed, chemically degreased and protected with two coats antirust primer and one enamelled coats. Sandblasting on steel works is available on request.

Every machine is designed according to the customer requirements.

SINGLE BEAM GANTRY CRANE
TYPE Capacity
[Kg]		 S
[Kg]		 A
[m]		 H
[m]		 L
[m]		 Vs
[m/min.]		 Vc
[m/min.]		 Vt
[m/min.]
CM 3,2 3.200 Da 6 a 30 Da 2 a 9 Da 5 a 12 Da 10 a 48 4/1,3 18/6 o 20/5 32/8 o 40/10
CM 5 5.000 Da 6 a 30 Da 2 a 9 Da 5 a 12 Da 10 a 48 4/1,3 18/6 o 20/5 32/8 o 40/10
CM 6,3 6.300 Da 6 a 30 Da 2 a 9 Da 5 a 12 Da 10 a 48 4/1,3 18/6 o 20/5 32/8 o 40/10
CM 8 8.000 Da 6 a 30 Da 2 a 9 Da 5 a 12 Da 10 a 48 4/1,3 18/6 o 20/5 32/8 o 40/10
CM 10 10.000 Da 6 a 30 Da 2 a 9 Da 5 a 12 Da 10 a 48 4/1,3 18/6 o 20/5 32/8 o 40/10
CM 12,5 12.500 Da 6 a 30 Da 2 a 9 Da 5 a 12 Da 10 a 48 4/1,3 18/6 o 20/5 32/8 o 40/10

 

<<< Back

DOUBLE BEAM OVERHEAD CRANE WITH ROPE WINCH

TECHNICAL CHARACTERISTICS

Structures
Designed and constructed depending to the crane service and use.

Broad
Flanged beams for low capacities and for the others use box beams in welded steel plate material are considered.

Travelling movement
On double rim steels wheels rotating on roller bearings with driving wheels controlled by self-breaking geared motors, progressive starting and breaking type.

Lifting movement
With electric rope hoist for capacities up to 8.000 kg and crab for bigger capacities. Heavy duty for power greater than 25 HP foreseen a slip ring motor with INOX step resistances. Creep speed or auxiliary hoist upon request.

Electric Equipment
Placed in a water tight metallic cabinet with high quality components , choosen accordingly. Reversal of travelling movement creep speed operation are controlled by a timer , in order to safeguard stress in movements parts.

Painting
With one coat antirust primer and two finishing enamelled coats. Sandblasting on steel works is available on request.

Fittings
For all the working necessities.

Upon request:
• Pincers and clamps, buckets and vacuum suction cups on the lifting apparatus.
• Travelling movements controlled by inverter.
• Remote control.

DOUBLE BEAM OVERHEAD CRANE WITH ROPE WINCH
TYPE Portata
[Kg]		 S
[m]		 H
[m]		 Vs
[m/min.]		 Vc
[m/min.]		 Vt
[m/min.]
PB 3,2 3.200 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PB 5 5.000 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PB 6,3 6.300 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PB 8 8.000 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PB 10 10.000 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PB 12,5 12.500 Da 10 a 30 Da 5 a 12 4/1 16/4 o 20/5 32/8 o 40/10
PBA 16 16.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 20 20.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 25 25.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 30 30.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 40 40.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 50 50.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10
PBA 60 60.000 Da 10 a 30 Da 5 a 12 3/1,5 16/4 o 20/5 32/8 o 40/10

 

 <<< Back

 

DOUBLE BEAM GANTRY CRANE

TECHNICAL CHARACTERISTICS

Structures
The master girders, legs, and connections, are welded structural steel plate material, reinforced by diaphragms and cross bracings. A gangway can be provided, on request, along one of the master girders.

Longitudinal travel
Properly dimensioned steel wheels running on roller bearings. Movement for high lifting capacities and large size cranes is achieved by means of double wheel articulated carriages.
Only highest quality casehardened and temperated oilbath gearboxes are used.
On request an inverter is available in order to have soft start, tht prevents dangerous load swingings.
It is installed on any crane gearmotors directly coupled on the wheel (very low maintenance).

Lifting and trolley
For single girder cranes a high quality hoist-trolley runs along the girder lower flanges, while double girder cranes are supplied whit a structural box crab, produced by ourself, which runs on four steel wheels rotating on roller bearings. Lifting winding drum directly splined on its gearbox. Electro-hydraulic shoes brake on the lifting movement.
Motor and gearbox fixing bases are manufactured by numerical control machine in order to assure the perfect ranging among the components.

Electric equipment
• Placed in a water tight metallic cabinet with high quality components.
• Double safety limit switch is mounted on the crab lifting movement.

Control
Usually controlled by means of low-tension pendant push-button panel. Remote control also available on request.

Painting
Steel structures are mechanically brushed, chemically degreased and protected with two coats antirust primer and one enamelled coats. Sandblasting on steel works is available on request.

Every machine is designed according to the customer requirements.

 

 

DOUBLE BEAM GANTRY CRANE
TYPE Capacity
[Kg]		 S
[m]		 A
[m]		 H
[m]		 L
[m]		 Vs
[m/min.]		 Vc
[m/min.]		 Vt
[m/min.]
CB 16 16.000 Da 10 a 36 Da 2 a 9 Da 6 a 12 Da 14 a 54 3/1,5 16/4 o 20/5 32/8 o 40/10
CB 20 20.000 Da 10 a 36 Da 2 a 9 Da 6 a 12 Da 14 a 54 3/1,5 16/4 o 20/5 32/8 o 40/10
CB 25 25.000 Da 10 a 36 Da 2 a 9 Da 6 a 12 Da 14 a 54 3/1,5 16/4 o 20/5 32/8 o 40/10
CB 32 32.000 Da 10 a 36 Da 2 a 9 Da 6 a 12 Da 14 a 54 3/1,5 16/4 o 20/5 32/8 o 40/10
CB 40 40.000 Da 10 a 36 Da 2 a 9 Da 6 a 12 Da 14 a 54 3/1,5 16/4 o 20/5 32/8 o 40/10
CB 50 50.000 Da 10 a 36 Da 2 a 9 Da 6 a 12 Da 14 a 54 3/1,5 16/4 o 20/5 32/8 o 40/10
CB 60 60.000 Da 10 a 36 Da 2 a 9 Da 6 a 12 Da 14 a 54 3/1,5 16/4 o 20/5 32/8 o 40/10

<<< Back